1997 Arburg Allrounder Selecta 270S 250-60 Injection Moulding Machine
Description
1997 Arburg Allrounder Selecta 270S 250-60 Injection Moulding Machine
Machine Type: 25T Injection Moulding Machine
Year: 1997
Condition: Good. Can be viewed under Power
Technical Specification
Clamping Unit
Clamping Force: 250 kN
Mould Opening Force (max): 14 kN
Size of Mould Platens (h x v): 406 x 408mm
Distance Between Tie Bars (h x v): 270 mm x 270 mm
Mould Opening Stroke: 275 mm
Mould Height (min): 200 mm
Max Daylight: 475 mm
Hydraulic Ejector - stroke: 90 mm
Ejector Force Forward/Backward: 15 kN
Injection unit
Screw Diameter: 22 mm
Ls/D Ratio: 20
Injection Pressure: 2000 bar
Stroke Volume: 30 ccm
Shot Weight, PS: 25 g
Injection Rate: 30 cm³
Injection Stroke: 80 mm
Screw Speed: 1/min
Nozzle Pressure: 30 kN
Electric and Hydraulic Equipment
Nominal Capacity of Pump Motor: 7.5 kW
Installed Heating Capacity: 2.7 kW
Reservoir Capacity: 120 L
Dimensions & Weights
Machine Dimensions(L x W x H): 2850 x 1000 x 1610mm
Machine Weight (Approx): 1900kg
Specifications
| Manufacturer | Arburg |
| Model | Allrounder Selecta 270S 250-60 Injection Moulding Machine |
| Year | 1997 |
| Condition | Used |
| Serial Number | 168854 |
| Machine Type | Injection Moulding Machine |
| Year | 1997 |
| Clamping Force | 250 kN |
| Mould Opening Force (max) | 14 kN |
| Mould Opening Stroke | 275 mm |
| Mould Height (min) | 200 mm |
| Max Daylight | 475 mm |
| Hydraulic Ejector - stroke | 90 mm |
| Ejector Force Forward/Backward | 15 kN |
| Screw Diameter | 22 mm |
| Ls/D Ratio | 20 |
| Injection Pressure | 2000 bar |
| Stroke Volume | 30 ccm |
| Shot Weight, PS | 25 g |
| Injection Rate | 30 cm³ |
| Injection Stroke | 80 mm |
| Screw Speed | 1/min |
| Nozzle Pressure | 30 kN |
| Installed Heating Capacity | 2.7 kW |
| Reservoir Capacity | 120 L |
| Machine Weight (Approx) | 1900kg |