Hidrogarne TL-100/1000E Mobile Gantry Hydraulic Press With Moving Head and 10-Meter-Long Table For Straightening Welded Structures and Plates Cut by Oxy Cutting

Hidrogarne TL-100/1000E Mobile Gantry Hydraulic Press With Moving Head and 10-Meter-Long Table For Straightening Welded Structures and Plates Cut by Oxy Cutting

Machine Type: Customized Hydraulic Presses

Series: Straightening

Description

The TL-100/10000E hydraulic press belongs to the T/NC series and is custom-designed for straightening welded structures and oxy-cut plates.

As with all our hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge.

It uses an optimized hydraulic system with a pressure below 320 Bar, ensuring prolonged durability and reliability in its performance.

It meets and satisfies all essential safety and health requirements according to CE regulations.

Structure and Tables

Features an electrowelded structure made exclusively from S355JR steel.

Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.

Calculated and designed with finite element software.

Longitudinal bridge movement is achieved using a frequency inverter and toothed belt.

Lateral movement of the head is motorized.

Cylinder and Hydraulic Group

Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides.

Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling.

Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder’s travel.

Motorized hydraulic group with two speeds and automatic disconnection of the rapid speed.

Cylinder decompression valve.

Pressure regulator.

Glycerin manometer with tonnage reading.

Electrical Installation and Safety

The electrical panel includes a selector for choosing between manual or semi-automatic operation.

Also features a selector for choosing between rapid approach speed or slow working speed.

Operation is carried out via a pendant control station with an emergency stop and low voltage control.

Includes a maneuver confirmation button.

Technical Specifications

Power: tn 100

Engine power: kW 4

Sliding head motor power: kW 0.37

Sliding frame engine power: kW 0.75

Work speed: mm/s 3

Approach speed: mm/s 9.2

Return speed: mm/s 14.4

Maximum pressure: Bar 320

Piston stroke: mm 450

Lower table: mm 10,000 x 2,545

Maximum vertical light (with table): mm 600

Head movement: mm 2.120

Bridge displacement: mm 9.140

Working height: mm 900

Full frontal: mm 10.200

Full side: mm 3.660

Total stop: mm 2.900

Weight: kg 26,000