Hidrogarne ML-300E/NC Hydraulic Press For Mold and Die Adjustment With Lower Table Ejection and Upper Table Tilting
Description
Hidrogarne ML-300E/NC Hydraulic Press For Mold and Die Adjustment With Lower Table Ejection and Upper Table Tilting
Machine Type: Customized Hydraulic Presses
Series: Adjustment of Molds and Dies
Description
The ML-300E/NC hydraulic press belongs to the M/NC series and is custom-designed for the adjustment of molds and dies, featuring a movable lower table and a tilting upper table.
It includes chrome-plated and rectified cylindrical columns with protective bellows, 200 mm in diameter, made from C45E steel, specifically manufactured to maintain a low friction and wear coefficient.
It uses an optimized hydraulic system with a pressure below 290 Bar, ensuring prolonged durability and reliability.
It meets and satisfies all essential safety and health requirements according to CE regulations.
Structure and Tables
Structure made from oxy-cut steel, divided into four electro-welded and machined monoblocks.
Movable lower table and tilting upper table, both machined with T-slot fixation grooves.
Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning.
Upper table equipped with hydraulic safety pins to prevent falling, and tilting counter-table at 110°, designed to support molds up to 35 TN during tilting, with disengagement and ramp parking at 140°.
Cylinder and Hydraulic Group
Single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides.
400-liter hydraulic group with a silent 1-speed Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system for working speed.
Hydraulic group cooling system with an independent air-oil radiator unit.
All M/NC series hydraulic presses include a lateral pressure switch allowing adjustment of the most suitable pressure setting for each type of work.
Glycerin manometer with tonnage reading.
Electrical Installation and Security
Electrical installation for manual and automatic operation of the main cylinder advance, low-voltage operation via two-hand pushbutton and gravity-drop pushbutton.
Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 7” touchscreen model MTP-700 located at the top of the electric pedal. Allows programming of semi-automatic and automatic operating modes, power, travel, and dwell time of the upper cylinder. Capable of storing 300 recipes, each with programmable values.
Electronic safety system for the upper table pins and mechanical and electronic positioning of the removable lower table.
Features anti-fall safety system with rack and trigger for automatic closure in case of hydraulic pressure failure or electrical system malfunction.
Level IV photoelectric barriers installed at the front and rear, along with lateral protections with openings and safety microswitches.
Technical Specifications
Power: tn 300
Engine Power: kW 20
Piston Stroke: mm 2.000
Approach Speed: mm/s 100
Working Speed: mm/s 8
Return Speed: mm/s 80
Guide Diameter: mm 200
Maximum Pressure: Bar 320
Useful Table Area: mm 3.000 x 1.800
Between Columns: mm 3.000 x 1.800
Vertical Light: mm 2.750
Working Height: mm 850
Total Height: mm 6.400
Weight: kg 57.000
Specifications
| Manufacturer | Hidrogarne |
| Model | ML-300E/NC Hydraulic Press For Mold and Die Adjustment With Lower Table Ejection and Upper Table Tilting |
| Condition | New |
| Machine Type | ML-300E/NC Hydraulic Press For Mold and Die Adjustment With Lower Table Ejection and Upper Table Tilting |
| Power | 300 |
| Engine Power | 20 |
| Piston Stroke | 2.000 |
| Approach Speed | 100 |
| Working Speed | 8 |
| Return Speed | 80 |
| Guide Diameter | 200 |
| Maximum Pressure | 320 |
| Useful Table Area | 3.000 x 1.800 |
| Between Columns | 3.000 x 1.800 |
| Vertical Light | 2.750 |
| Working Height | 850 |
| Total Height | 6.400 |
| Weight [kg] | 57.000 |